O-ring & Rubber Packing

Our O-ring is a loop of elastomer with a round (o-shaped) cross-section, which is used as a mechanical seal or gasket. Our O-ring is specifically designed to be seated in a groove and compressed during assembling of two or more parts, resulting in the creation of a seal at the interface.

We offer variations in profile design otter then circular, which includes; X shaped, D shaped T shaped, and other shaped circular packings. All these different designs are available for different applications, as per the environmental conditions & requirements. We are offering different types of automotive o-rings, silicone rubber o rings, rubber packing rings, rubber o-rings and automotive rubber o-rings more....

For o-ring and rubber packings, we offer different sealing element or material choices, which includes; nit rile(NBR), fluoro elastomer(FKM, FPM), natural rubber, polyacrylate (ACM PA), silicone (MVQ), EPDM and HNBR.


O-RINGS, SQUARE RINGS, QUAD SHAPED RINGS
We offer a wide range of compounds, that are approved to every military and industrial specification. Our stock standard compound includes; Brna-N (Nitrile), flourosilicone, neoprene, EPR, silicone, and flourocarbon (Viton). For many unique applications, special rubber compounds, urethane, and Teflon, as well as special sizes are available with us in a cost effective manner.

V-RINGS
Our V-ring is an all-rubber seal, which mounts directly on the shaft and seals axially against the counter-face, housing, bearing race, and similar surfaces. It is specifically designed with a long flexible lip, which acts like a mechanical face seal and as a lip seal. It efficiently retains the lubricants or exclude contaminants. Our V-ring can be used as the primary or as a secondary back-up seal, as it is capable of withstanding a greater amount of eccentricity and misalignment along with axial movement. Each of our offered V-ring can be used for a range of different shaft sizes.

WIPER RINGS
Appropriate for those extremely dirty rod wiping situations, a standard Poly-seal can be used as a wiper ring. Our wiper ring assures great efficiency and increases the life of internal seals and bearings in hydraulic equipment.

U-CUPS
We offer a complete range of U-cups, specifically constructed from different materials such as homogeneous rubbers, leather and fabric reinforced rubber compounds. However, if in any application which requires a special U-cup, we can make available customized product according to the requirements or specifications of the clients.

POLY SEALS
Our polyseals are a family loaded lip U-cups. Each style incorporates the use of a quad shaped rubber energizer, which improves the low pressure, low temperature sealing & other characteristics of a fully molded polyurethane U-cup. Our Poly-seals are available in a large variety of compounds including; Fluorotrel, Nitrile, Fluorocarbon, and Ethylene Propylene Elastomer. Besides this, polyseals are available in extended range of diameters and cross sections. Our polyseal is capable of sealing a broad range of fluids including; petroleum based hydraulic oil & all fire retardant fluids such as phosphate esters, water glycol and more.

PISTON CUPS
We offer a wide range of piston cups, which are constructed of homogeneous rubber, urethane, cotton duck and rubber and other material. Our piston cups can be supplied with a center hole, in order to ensure concentricity between cup and piston, or the option of receiving them with no center hole, in order to adapt one standard bore size and different piston hardware is available.